Zeiss shows latest materials research instruments at Materials Science & Technology (MS&T) 2016

Published: 22-Oct-2016
Digital

They include innovative imaging solutions for applications such as quality control and quality assurance


Zeiss will showcase the latest microscopy innovations and advancements at Materials Science & Technology (MS&T) 2016, which will be held October 24-26, 2016 at the Salt Palace Convention Center, Salt Lake City, UT.

On display at Booth #401 will be Zeiss Axio Observer.Z1m inverted microscope, Zeiss Axio Lab A.1 MAT manual routine microscope for materials, Zeiss Smartzoom 5 digital microscope, and Zeiss Stemi 508 stereo microscope.

The Smartzoom 5 digital microscope, in particular, is ideal for quality control and quality assurance applications and is also an excellent choice for conducting failure analyses.

Quick and easy to set up, the Smartzoom 5 is fully automated and equipped with dedicated quality assurance and quality control components. Its simple operation means even untrained users can produce excellent results.

Visitors to the booth can also view a video on EVO MA with SmartSEM touch, which combines high definition Scanning Electron Microscopy with an intuitive user-friendly experience.

  • Companies:
  • Carl Zeiss International
See more

You may also like

Digital

ZEISS Crossbeam 550 sets new standards in focused ion beam scanning electron microscopes

Read more
With its enhanced resolution at low voltages and stability for long-term 3D tomography the ZEISS Crossbeam 550 is ideal for use in life sciences

Trending Articles

  1. Industry 4.0: What is the advantage of real-time digital signage? Olivia Fernandez from Digital Therapeutics (DTx) disusses how digital signage can serve in cleanrooms as a versatile and powerful tool that allows those in charge to ensure those working in a facility are informed with correct and integrated information displayed in an engaging and effective manner
  2. You need to be a subscriber to read this article.
    Click here to find out more.
    Leak detection in process vessels In the manufacture of biologicals single-use disposable flexible vessels are commonly used as bioreactors, mixers and sterile fill stations. To guarantee the vessels are of the quality needed to ensure process integrity, they must be proven free from biological contamination and free of leaks that could be an ingress route for contaminants such as bacteria. The traditional pressure decay method has significant limitations, so ATMI has created a reliable and repeatable method involving pressurising the vessel with helium instead of air. By using this method, defects as small as 10µm can be easily detected.
  3. Clean in place systems explained Clean in place (CIP) technology has been around since the 1950s yet even today it is often seen as a low priority when building a process plant. It is, however, a critical part of it and can lead to considerable benefits if carried out correctly at the correct project stage. Dave Adams, systems director, Suncombe, explains
  4. 5 reasons to choose Setra CEMS A combination of sensor hardware and environmental monitoring software help continuously monitor these spaces and ensure the quality of the products manufactured
  5. Micronclean delivers improvements to its market leading garment portal Micronclean’s market leading garment portal enables customers to view information about their garments and contracts in real time

Upcoming event

Lounges

23-25 April 2024 | Conference | Messe Karlsruhe, Germany See all

You may also like

Digital

ZEISS Crossbeam 550 sets new standards in focused ion beam scanning electron microscopes

With its enhanced resolution at low voltages and stability for long-term 3D tomography the ZEISS Crossbeam 550 is ideal for use in life sciences
Digital

ZEISS presents new microscope cameras

Carl Zeiss introduces two new high-speed USB 3.0 digital microscope cameras
Sustainability

Industry 4.0: What is the advantage of real-time digital signage?

Olivia Fernandez from Digital Therapeutics (DTx) disusses how digital signage can serve in cleanrooms as a versatile and powerful tool that allows those in charge to ensure those working in a facility are informed with correct and integrated information displayed in an engaging and effective manner
Cleaning

VR cleanroom training start-up receives €5.7m boost

Innerspace has received a major third investment from Matterwave Ventures to grow its VR cleanroom operation training solution
Regulatory

Cleanroom GMP tablet supplier AGL partners with new software firm

AGL Automation has partnered with Novatek Europe to offer their cleanroom software range for use on the range of cleanroom GMP tablets for paperless cleanrooms
Design & Build

Angstrom Technology Group launches new UK & EU website

The global cleanroom design & build company has worked on the new website to strengthen global status following two acquisitions in 2022
Design & Build

Aircuity introduces "adaptive airflow" application for cleanrooms

US-based ventilation expert has launched the new adaptive airflow for ISO Class 7 and 8 cleanrooms to allow for carbon reduction, energy savings and precisely controlled IAQ
Subscribe now