NASA technology protects Webb Telescope from contamination

Engineers are taking special care at NASA to prevent contamination from outgassing from affecting the James Webb Space Telescope. Thermal Coatings Engineer Nithin Abraham placed Molecular Adsorber Coating panels in the chamber where the Webb telescope will be tested

Thermal Coatings Engineer Nithin Abraham places a MAC panel at the very bottom of Chamber A where the Webb telescope will be tested
Credits: NASA/Chris Gunn

Contamination can occur when vapour containing organic molecules is emitted by a substance – a process that is called ‘outgassing’. The ‘new car smell’ is an example of that, and is unhealthy both for people and for sensitive satellite instruments. So NASA engineers have created a new way to protect such instruments from the damaging effects of contamination coming from outgassing.

‘The Molecular Adsorber Coating (MAC) is a NASA Goddard coatings technology that was developed to adsorb or entrap outgassed molecular contaminants for spaceflight applications,’ said Nithin Abraham, Thermal Coatings Engineer at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. MAC is currently serving as an innovative contamination mitigation tool for Chamber A operations at NASA Johnson Space Centre in Houston, Texas. It can be used to keep outgassing from coming in from outside areas or to capture outgassing directly from hardware, components and within instrument cavities.

In this case, MAC is helping by capturing outgassed contaminants outside the test chamber from affecting the Webb components. MAC is expected to capture the outgassed contaminants that exist in the space of the vacuum chamber (not from the Webb components). ‘Although we cannot stop contaminants within the vacuum chamber from outgassing, we can try to capture them with MAC before they reach the expensive hardware that is housed inside the test chamber,’ Abraham said.

In May 2015, several test panels spray coated with MAC were custom designed and fabricated for use in Chamber A in preparation for the arrival of the James Webb Space Telescope’s first Optical Ground Support Equipment (OGSE-1). ‘The MAC panels were installed in very strategic locations within Chamber A to capture vacuum chamber contamination originating from persistent sources, such as silicone pump oil residue and hydrocarbons,’ Abraham explained.

Some silicone-based contaminants are known to outgas and spread easily, even at ambient temperatures

Some silicone-based contaminants are known to outgas and spread easily, even at ambient temperatures, and are extremely difficult to remove and clean. The use of MAC panels during the OGSE-1 test would lower the contamination risk and prevent these harmful outgassed components from migrating and depositing onto highly sensitive Webb telescope optical hardware surfaces during testing.

The walls of the chamber have a matte finish; ironically, since keeping contaminants out is critical, this gives them the appearance of looking unclean. Some areas in the chamber also have markings that indicate where there’s been rubbing from a tool that has slightly burnished the surface.

The new molecular adsorber is highly permeable and porous — attributes that trap the outgassed contaminants

The new, patent-pending sprayable paint that adsorbs these gaseous molecules and stops them from affixing to instrument components was created by a team at NASA’s Goddard Space Flight Centre in Greenbelt, Maryland. Made of zeolite, a mineral widely used in industry for water purification and other uses, and a colloidal silica binder that acts as the glue holding the coating together, the new molecular adsorber is highly permeable and porous — attributes that trap the outgassed contaminants.

Webb will be tested in Chamber A, the thermal-vacuum test facility at NASA’s Johnson Space Centre in Houston, Texas. Chamber A is now the largest high-vacuum, cryogenic-optical test chamber in the world, and made famous for testing the space capsules for NASA’s Apollo mission, with and without the mission crew. It is 55ft (16.8m) in diameter by 90ft (27.4m) tall. The door weighs 40 tons and is opened and closed hydraulically.

Webb is an international project led by NASA with its partners the European Space Agency and the Canadian Space Agency.

Companies