SGS launches training courses on the FSSC 22000 v5 standard

Published: 5-Aug-2019
Regulatory Active Nutrition Food

The FSSC 22000 v5 was created to provide a holistic solution for food safety audits and certification

SGS has announced the launch of FSSC-approved training courses covering the FSSC 22000 v5 standard.

Created to provide a holistic solution for food safety audits and certification, the FSSC 22000 v5 standard enables an organisation to have confidence in bringing their food products to the supply chain, and it is easy to integrate with other existing management systems.

SGS is the largest global provider of FSSC certification, and the first certification body approved by FSSC to deliver FSSC 22000 v5 training courses.

The FSSC 22000 training caters for the needs of food/feed supply chain organisations, such as manufacturers of all food and beverage types, ingredients/additive manufacturers, pet and animal feed manufacturers, and packaging manufacturers.

Training on the latest FSSC 22000 v5 standard can help companies to:

  • Identify the requirements of FSSC 22000 v5 for FSMS
  • Develop your knowledge of food safety management systems
  • Gain the skills and knowledge to perform FSSC 22000 v5 audits against FSSC 22000 v5 and ISO 22000:2018
See more

You may also like

Regulatory

SGS certifies Dow's Stade site with EXCiPACT GMP standard

Read more
The certificate demonstrates that this site manufactures pharmaceutical excipients according to the EXCiPACT Good Manufacturing Practice (GMP) Certification Standard

Trending Articles

  1. What is ISO 8 cleanroom classification? Each cleanroom class is denoted by a maximum concentration of particles per cubic meter or cubic foot of air. ISO 8 is the second lowest cleanroom classification
  2. Impact of the new Annex 1 on sterile filling in pharma EU GMP Annex 1 is a whole new era for the sterile filling industry. From barrier technology to “first air”, pharmaceutical manufacturers have a lot to decide. Johannes Rauschnabel from Syntegon discusses how equipment suppliers can help with implementation
  3. How-to guide: Pass box qualification Material transfer equipment plays an important role in minimising contamination risks during the manufacturing process. Industry expert, Jesus Casas, gives an overview of available pass boxes and a step-by-step explanation on how to qualify them appropriately
  4. Harmonisation of Annex 1 and ISO 14644-1: A deeper look Alexander Fedotov from Invar explains that the harmonisation of standards seems to be a driving force for setting particle limits and why this may not always result in logical scientific decision making
  5. Clean in place systems explained Clean in place (CIP) technology has been around since the 1950s yet even today it is often seen as a low priority when building a process plant. It is, however, a critical part of it and can lead to considerable benefits if carried out correctly at the correct project stage. Dave Adams, systems director, Suncombe, explains

Upcoming event

Lounges

23-25 April 2024 | Conference | Messe Karlsruhe, Germany See all

You may also like

Regulatory

SGS certifies Dow's Stade site with EXCiPACT GMP standard

The certificate demonstrates that this site manufactures pharmaceutical excipients according to the EXCiPACT Good Manufacturing Practice (GMP) Certification Standard
Regulatory

SGS establishes South Asia Centre of Excellence for elemental analysis

Laboratory in Chennai now operates three ICP-MS systems for compliance with updated ICH Q3D regulatory guidelines on elemental impurities
Regulatory

SEFA joins forces with SGS

Partnership agreement opens a new chapter for the laboratory furniture testing sector
Regulatory

SGS achieves BSL-2 compliance

Facility in Fairfield, NJ, meets requirements for both analytical and microbiological testing
You need to be a subscriber to read this article.
Click here to find out more.
Regulatory

A Quality by Design approach to setting up E&L studies

Evaluation of extractables and leachables is an important aspect of the FDA’s QbD initiative in drug design. But there are, as yet, no exact details on how to set up a suitable study strategy. Andreas Nixdorf, SGS Life Science Services, discusses general approaches and cornerstones to E&L testing
Manufacturing

Univar expands filling capabilities for pharma and food

Univar, a leading European distributor of chemicals and ingredients, is expanding its filling capabilities for pharmaceutical and food products by replacing dedicated tank trucks with Univar-branded swap bodies (31,000 litre ISO tanks). This move, combined with Univar’s state-of-the-art white room, allows the company to offer its customers a one-stop-shop for sourcing, transport, filling and other handling requirements.
Regulatory

Impact of the new Annex 1 on sterile filling in pharma

EU GMP Annex 1 is a whole new era for the sterile filling industry. From barrier technology to “first air”, pharmaceutical manufacturers have a lot to decide. Johannes Rauschnabel from Syntegon discusses how equipment suppliers can help with implementation
Subscribe now