Market Reports

Martin Birch and Peter Makowenskyj| G-CON Manufacturing

The modular construction movement is an unstoppable train at this point. In an exclusive interview, two G-CON Directors discuss the trajectory of this expanding technology, and how multiple global crises are changing business on both sides of the pond

AMC monitoring in fabs with spectroscopic methods

Airborne molecular contaminants clearly affect semiconductor yield and can’t be completely removed by modern filters in cleanroom fabs. Thomas Benoy from the $2.1m MetAMCII project says it is aiming to address the increasing need for measurement capabilities from the low ppb to the ppt in real time with low uncertainties

Cleanroom Conference and Manufacturing Chemist Live 2020 to go virtual

The virtual event taking place on 10-11 November 2020 will provide delegates with full access to the Manufacturing Chemist Live, Cleanroom UK, India and Singapore content and exhibitors

Cleanroom tightness and room pressurisation: Discrepancy?

A cascaded room-pressure regime has been considered for decades to prevent cross-contamination of different processes. But Harald Flechl from ISPE says today's tight cleanrooms must have leaks to ensure a room-pressure regulation - so why should we build tight cleanrooms?

Milos Perovic | Termovent

In an interview with Cleanroom Technology, HVAC specialist COO and Head of the Cleanroom division was proud to discuss the behind-the-scenes importance of controlled environments during a time of pandemic

The evolving role of a contamination control strategy in Annex 1

A Contamination Control Strategy is a cyclical process designed to prompt the manufacturers to identify and resolve risk. With the 2020 draft update to Annex 1, David Keen from Ecolab looks at the interesting specific impacts of the changes on the role of a well-designed CCS

Adoption of rapid methods for QC microbiology in biopharmaceuticals

Rapid turnaround times and high sensitivity are essential for microbial QC testing. David Jones from Rapid Micro Biosystems explains that by the time a traditional test is completed, it can be difficult to rewind several days into the past and pinpoint the cause of a contamination event

The benefits of decentralised air handling

Performance requirements and sustainability targets can sometimes be at odds in the cleanroom world, but decentralised air handling system design can actually benefit both says Connect 2 Cleanrooms' Sam Armer

Cleanroom Conference and Manufacturing Chemist Live events set to go ahead

The co-located events will go ahead in October with new safety measures in place, after being postponed from their original date at the start of summer due to COVID-19

Nano-copper technology for antimicrobial surface design

Research has shown that copper ions are released when microbes land on a surface and can kill them, but regular copper can cause an uneven surface that is ideal for the microorganisms to adhere to. Selina Ambrose from Promethean Particles discusses nano-copper as a novel technology aiming to address this with liquid dispersion

Isolators: The beginnings of a new trend in Asia

To date, very few filling and closing machines have been installed in Asia. Aprogen Biologics and Optima Korea are both convinced that this will soon change as they install an isolator system in South Korea

Reginald Fernandes & Jamie Tempest | Reading Scientific Services

When taking its first venture into cleanroom technologies and sterility testing, RSSL picked a balanced team of microbiologists with different specialisms to guide them

UK market report: Cleanroom business from Brexit to COVID-19

Uncertainty is a word all UK operators are well-acquainted with by now, from Brexit to a global pandemic. Speaking to directors of companies in the thick of it shows how resilience and preparedness is helping them transition to the ‘new normal’

Isolator transfer design for ATMP products

A challenge posed by the increase of closed systems is the transfer of semi-finished products without losing the aseptic conditions required by regulations. A new study has tested a transfer system aiming to offer biocontainment without losing cell viability of ATMP products

Putting disinfectant to the test: Designing a field trial

Cleaning and disinfection is a process that can become very elaborate in cleanrooms. Tim Sandle in conjunction with Ecolab Life Sciences discusses designing a thorough and reliable field trial to test this process

Annex 1: How v.12 update impacts cleanroom cleaning and disinfection

The latest draft of sterile manufacturing guidelines may change again, but Matt Cokely from Ecolab says the direction of travel for the guidance is reasonably clear with regards to the guidance for cleaning and disinfection as an integral part of a Contamination Control Strategy

Contamination in a changing food production industry

The European food sector has changed significantly over the last three years. The influence equipment manufacturers have had on cross-contamination and standard cleaning requirements is key to enabling these advances

Cleaners and carrier fluids: Preventing contamination in medical device production

Modern cleaning and coating fluid technologies and associated vapour degreasing equipment provide consistent and reliable device cleaning. However, these modern cleaning fluids offer added benefits beyond this

COVID-19: Testing for surface and air presence

Protecting healthcare workers against coronavirus requires a multi-faceted approach. Rapid testing technology for aerosolised and surface virus are two ways that ensure detection for an effective management strategy

Annex 1: How new draft impacts cleaning and disinfection in cleanrooms

The v.12 draft update to EU GMP Annex 1 has laid out how cleaning and disinfection should be considered ‘together’ within a documented contamination control strategy

Halden Shane | TOMI Environmental Solutions

Leading a decontamination company during an infectious disease outbreak is no mean feat. Founder and CEO of TOMI, Dr Halden Shane, explains why its Ionized Hydrogen peroxide is a great weapon in your arsenal

Guide to implementing a VHP system for facility biodecontamination

Vaporised hydrogen peroxide biodecontamination systems can be installed and integrated into a plethora of cleanrooms or suits. Here John Klostermyer, VHP Application Project Manager at STERIS, provides some tips for drafting a process-oriented User Requirement Specification

Social distancing in a lab

While rigorous hygienic standards are already in place, new practices are required to help those in the cramped confines of cleanrooms and labs during the COVID-19 pandemic. Sue Springett, Commercial Manager at Teknomek, discusses what needs to be evaluated; such as the problems in crowded gowning rooms and the conflicts of priorities with air flow

Gaby and Ute Schilling | Schilling Engineering

German cleanroom company Schilling Engineering was founded more than 20 years ago. Now the founder and CEO is preparing his twin daughters to become his successors

Trending Articles

  1. Tips for particle concentration compliance under ISO 14644-1:2015 Apply these six steps to make your cleanroom fit for the new standard, says Hasim Solmaz, Lighthouse Worldwide Solutions
  2. Your options for aseptic transfer systems for isolator and RABS Dr Timo Krebsbach and Dipl.-Ing. Frank Lehmann from SKAN discuss the landscape of transfer options in pharmaceutical barrier systems
  3. You need to be a subscriber to read this article.
    Click here to find out more.
    Annex 1 and “first air”: What is it and how is it used? First Air as a concept is a major update in the new Annex 1 to continue global harmonisation of regulatory standards, but what is it and how is it used in the new document to improve clarity and compliance? Josh Russell, VP of Sales and Marketing at AST discusses
  4. Precision cleaning explained Cleaning to perfection is a sophisticated process and yet vital to product integrity. Dr Brent Ekstrand, VP of Science & Technology at Astro Pak, sheds lights on contaminants and the tests performed to measure them
  5. You need to be a subscriber to read this article.
    Click here to find out more.
    Reusable vs single-use cleanroom garments in traditional Grade B cleanrooms Matts Ramstorp from BioTekPro summarises the current situation with regard to cleanroom garments, in relation to future demands and recent scientific findings

Upcoming event

The future of cleanrooms: automation, digitisation and sustainability

19 February 2026 | Virtual See all