Portable FTIR gas analyser detects almost any gas

Published: 1-Nov-2011
Analysis

Laboratory grade gas analysis brought into the field

Instrumentation specialist Quantitech has launched a new version of the Gasmet portable multiparameter FTIR gas analyser, which has brought laboratory grade gas analysis into the field.

The DX4040, is lighter, easier to use and more flexible than its predecessor. However, its most important development lies in the ability of the device to identify unknown gases in the field (at the touch of one button) when using a new version of the unit's Calcmet software on a Windows tablet PC.

The unknown gas identification capability is retrospectively applicable to existing DX4030 analysers when using the new software and tablet PC.

While the DX4040 is able to identify thousands of gases, for users investigating known types of gas the unit can be used with a handheld Bluetooth PDA incorporating a 3G modem, camera and GPS so that time and location are assigned to each analysis.

The Milton Keynes, UK-based firm says use of the PDA is particularly popular because it enables the simultaneous display in almost real-time of up to 25 gases.

Because the DX4040 is able to measure so many gases, it is suitable for a wide variety of applications, including chemical spill, security, forensic investigation, occupational health, anaesthetic gases, research and many others.

See more

You may also like

Analysis

The case for a facility monitoring system

Read more
In regulated manufacturing, monitoring environmental conditions and critical equipment is essential to protect product quality, yield, and patient safety. Facilities often use a Facility Monitoring System (FMS) to track factors like airborne particles, temperature, and humidity. Beyond regulatory compliance, FMS delivers real business value through reduced waste, improved yield, higher quality, and greater profitability

Trending Articles

  1. Five fundamentals of particle counters Particle counters are used in cleanrooms to count and size the particles in the air so the cleanroom can stay in proper working function
  2. A guide to choosing the best particle sample point location Particle counting in pharmaceutical applications can be clearly segregated into one of three categories: certification, qualification and monitoring. Each category requires a different approach as explained by PMS' Mark Hallworth
  3. CMR Controls CMR Controls manufactures low pressure and air flow measurement and control systems for standard air conditioning, clean rooms, sterile laboratories, microchip production areas and fume cupboard extract systems.
  4. Microbiology: failings and best practice Microbiological issues in pharmaceutical plants can result in plant shutdowns and products withdrawn from the market. Failures are common in environmental monitoring, media fill, sterilisation, aseptic practice and gowning. Introducing lean practices can determine optimal batch size and lead to a decreased number of test sessions for bioburden, endotoxins and sterility testing, while taking a risk-based approach to determining objectionable micro-organisms may ease the cost and burden of unnecessary testing but requires a better understanding of the processes and risks involved.
  5. How to design a cleanroom monitoring system This guide to designing a GMP-compliant cleanroom monitoring system is the first of a series of four articles about monitoring systems covering design, installation and validation, maintenance, and data interpretation

Upcoming event

Cleanzone Middle East

September 18-19 2025 | Conference | Conrad Dubai, United Arab Emirates See all

You may also like

Analysis

The case for a facility monitoring system

In regulated manufacturing, monitoring environmental conditions and critical equipment is essential to protect product quality, yield, and patient safety. Facilities often use a Facility Monitoring System (FMS) to track factors like airborne particles, temperature, and humidity. Beyond regulatory compliance, FMS delivers real business value through reduced waste, improved yield, higher quality, and greater profitability
Analysis

Beckman Coulter Life Sciences and HSE•AG partner to advance nucleic acid quantification and purification

Beckman Coulter Life Sciences has partnered with Swiss automation specialist HSE•AG to advance nucleic acid quantification and laboratory automation
Cleaning

Cleanroom Supplies adds cleanroom keyboard to Optimum Protection brand

The UK-based cleanroom equipment and consumables supplier has unveiled the new "Hygienic Wireless Bluetooth Silicone Cleanroom Keyboard"
Cleaning

Prominent microbiology firm Cherwell to rebrand as AnalytiChem UK in September

The UK-based cleanroom microbiology solutions provider will rebrand in September, marking the next stage in its integration with the global AnalytiChem Group
Containment

BLOCK to create a real-time monitoring prototype for gene therapy production in isolators

Containment product expert BLOCK Technology has been working since January 2025 to create a system that will use image analysis and real-time 3D modelling of the production process
Analysis

Pharmagraph enhances iVAS air sampler with support for 25 lpm flow rates

The new upgrade enables sampling durations of over 2.5 hours per plate
Analysis

Cherwell launches locking lid media plate compatible with lab automation systems

The cleanroom microbiology specialist has expanded its Redipor prepared media range with a new locking lid plate format, designed to enhance workflow efficiency in pharmaceutical and medical manufacturing environmental monitoring
Subscribe now